Launch Pad Parts

   
QTYITEM
  
Cross Truss
1PVC Cross 1.5" Dia
4PVC Pipe 1.5" Dia in 9" Sections
4PVC 45deg Angles, 1.5" Dia
4PVC Female Threaded Adapters 1.5" Dia
  
Legs
4PVC Male Threaded Adapters 1.5" Dia
4PVC Pipe 1.5" Dia in 30" Sections
4PVC End Caps, 1.5" Dia, Non Threaded (Do not use if you are adding adjustable legs)
  
Optional Adjustable legs
4PVC Female Slip-Joint Compression Couplers 1.5" Dia (Use in place of end caps above)
41.5" Dia x 12" slip joint Extension Tubes (Located by the sink traps at the hardware store)
4PVC End Caps, 1.5" Dia, Threaded (Epoxy on the ends of the extension tubes)
  
Platform
Preferred20" Diameter 10 Gauge Stainless Steel Plate (RTV Standard) 
Acceptable24" Diameter 1/2 thick particle board round (NOTE: if you use this approach you must have a separate blast deflector)
41/4 x 20 bolts, 3" long
41/4 x 20 Nuts 
41/4 ID Washers
  

Go to Rod Mount Options page.

Return to Launch Pad page.

Rate this page

We want your opinion, so make like a Chicago Democrat and vote early, vote often, vote even if you are dead. However, as this is an electronic ballot, West Palm Beach Democrats will need to find a better excuse than hanging or pregnant chads for failing to properly fill out the form.

E-Mail Address: RTV privacy policy
First Name: Last Name: Keep me anonymous
Interesting?
Useful?
Bizzare?
1=Feckless, 5=Benefic 1=Bromidic, 5=Coruscating 1=Quotidian, 5=Pathological




C'mon! Tell us what you really think about this page. We can take it. Really!
(It is only fair to warn you that those who say something truly idiotic may be mocked when Dogbert answers our mail.)

E-Mail Address: RTV privacy policy
First Name: Last Name: Keep me anonymous
Feedback Type



© Copyright 2000-2008, Bradley Vatsaas, Richard Vatsaas, and Mark Vatsaas. All Rights Reserved.